Share your DESGN Experience
Please share with us your experience after taking the DESGN 200-310 exam, your materials, the way you learned, your recommendations…
Your posts are warmly welcome!
Please share with us your experience after taking the DESGN 200-310 exam, your materials, the way you learned, your recommendations…
Your posts are warmly welcome!
CCDA@November , shame, in the exam I will just have to be carefull, for double negatives, and similar answers, it would nice to get a idea of the wording.
@Anonymous nothing new in those questions.
@Anonymous Wow I can’t believe you could still regurgitate all of those questions and answer choices. At first, I tried to commit a few of them to memory, but it was too much for me to do along with trying to pass the exam! Other than the ones I talk about below, I ended up choosing the same answers as you:
A customer is designing a WAN environment that supports a Cisco Unified Communications
infrastructure and is concerned about latency between the sites.
What is the maximum one-way latency for an acceptable audio call?
A. 120 ms
B. 150 ms
C. 210 ms
D. 400 ms
Answer: B
For this question, I thought it was D. This is because the G.114 standard in the book mentioned 3 different ranges to know:
-400ms = unacceptable
So technically, isn’t the MAX acceptable latency anything 400ms or less?
When designing a new OSPF network, which type of router is used to control flooding of link state
advertisements between logical groups of routers?
A.
Backbone Router
B.
Autonomous System Border Router
C.
Internal Router
D.
Area Border Router
I agree with your answer (ABR), but remember that even if they had the right abbreviation for ASBR, it’s mainly concerned with handling E1 and E2 external routes from the outside rather than internal OSPF LSA traffic.
Cisco Unified Wireless networks support two campus design models Centralized or Local Mode
and Cisco FlexConnect Which statement about the Local Mode design model is true?
A.
The wireless LAN controller and access points are co-located.
B.
It is recommended for remote-site deployments.
C.
It is recommended for sites that use less than 50 Aps.
D.
It is recommended for sites with a local WAN distribution layer.
I didn’t get this one on my exam, but isn’t local mode when the AP pretty much assumes responsibility for all AP and WLC functionalities? I would like to believe that it’s intended deployment is for remote sites when you want the AP to be in complete standalone mode as opposed to having to reach out across the WAN to get instructions from the main site WLC.
@CCDA@November
I understand your situation, and sorry for being unable to confirm you screenshots. Like what Anonymous was saying, mastering the Chule should at least make you pretty comfortable with 50% of the questions. Also, be sure to do some extra studying on data center design, because those questions nail you hard if you haven’t had the chance to revise for them. Let us know how it goes, and BEST OF LUCK!!
Hmm, using the little arrows cut off my G.114 standard discussion. Here’s my addendum!
-Less than 150ms = acceptable voice quality
-Between 150 and 400ms = acceptable if the org is okay with it.
-More than 400ms = unacceptable by any standard
Dumps 50-60% , but you have to go through nuggets or some basic books which will help to solve questions…
An engineer is designing a disaster recovery solution to avoid IP renumbering when bringing up virtual machines in the alternate data center. Which technology is used?
A. Virtual Routing and Forwarding]
B. Virtual Device Contexts
C. Overlay Transport Visualization
D. Multicast Routing
A or C?
Dears,
I heard SPOTO is a pioneer and have valid dumps. If someone has please let us know. Looking forward to your kind support. Thanks in advance
ccdpnew at gmail dot com
Yesterday I bought a Spoto dump (200-310, 214q).
For a small fee, I can send you screenshots.
If you are interested, then write to me asatau @ gmail.com
I just need to return the money spent.
I also plan to buy Spoto CCDP dump.
Just passed today with 963 passing score is 846!
Labs -> SIM & check config to answer.
D&D -> portals
Good luck to all
Remove 1234 from link and get dumps
wow.l1i2n3k4/pWt
I agree with your answer (ABR), but remember that even if they had the right abbreviation for ASBR, it’s mainly concerned with handling E1 and E2 external routes frotrgm the outside rather than internal OSPF LSA traffic.
Cisco Unified Wireless networks support two campus design models Centralized or Local Mode
and Cisco FlexConnect Which statet5ment about the Local Mode design model is true?
A.
The wireless LAN controller and access points are co-located.
B.
It is recommended for remote-site deployments.
C.
It is recommended for sites that use less than 50 Aps….
any questions or dums
@Stoch plese give us price here >check your email for my message
to all guys wanna to pass the exam .. i think creating group buy better than wasing our time
bas4play at gmail com >> please contact me for arangment …
wolverine@ can you please share dump
my email is data4u333 at yahoo dot com
Anyone have valid dump please share
my email is data4u333 at yahoo dot com
Hi all,
I sent an example of screenshots to you in the mail.
I will take (with these dumps) an exam next week.
It seems to me that they will be valid because i trust Spoto.
I replied to your mail Stoch >>thanks for it
Every body .. Some people have a limited budget for this dump and have to get back what the spend anyhow
I suggested group buy for valid and trunst dump
1- Me bas4play at gmail >>> $10
2..
3..
4..
5..
6..
please contribute if you want to save your time
@bas4play is this dump Spoto?
Hi @Stoch can you also please share and other can you share your materials at (please remove spaces) ccc1name @ gmail . com
Hi Stoch,
Can you share jameskerry007 at gmail dot com
Thanks
I have observed this website for a long time, and the website has helped many people pass CCNA CCNP CCIE. This is their only discount this year. Seize the opportunity. Although I heard that Cisco is about to usher in a major reform, the website can guarantee a free update for one year, so I am not worried about the next change of Cisco
ht*****tps://docs.google.c*****om/document/d/1YCdNtwSUrdTW68-9n2JAVEHJOKjsYQSgTmUewKNarG4/edit?usp=sharing
@Stoch, why do you trust Spoto? I am not sure to trust or not, but i did buy and going to take the exam next week as well.
YES it is SPOTO ??
I’m not wanna to make profit here guys >>
I discuss with Stoch and he just need to get back what he paid
The question is screen shot ..
I think we have to save our times guys
@Exam_NextWeek
SPOTO is best now >> would you confirm how many question you have ?
@Exam_NextWeek .. would you please send me SPOTO dump at bas4play at gmail
I started conversation with Stoch unfortunately He did not answer me
@bas4play, why you think spoto dumps is best now? there are 214 questions, which I can’t share, it is almost impossible to sure!
@Exam_NextWeek Check thair website .. they have evidence screenshot .. I used thair dumps before
we are here to help each other regarding exam if you are not sure send me the dump and I will took my test after tomorrow .. I promise to give you my feed back .. right now I used examtopics dot com for question bank
because I trust SPOTO I ask you for shring dump
My. Exam is tomoorow and frankly most of the people here who have paid dump dont try to share with other .istead they need other to help them which is very strange situation I think ..
If you will not help other why come here at first place …I will try to write about my exam experince but not here for sure …
@bas4play how did your exam go? Please ignore others…. not everyone is honest here.
I hope you passed!
hi,
what is the best place to get question from i wnat to pass this asap
thanks
Dear Friends,
I failed in Exam 200-310 , looking for 2nd attempt after a week can someone share the Valid dumps if available really need your help guys
arif,ilyasee(a)gmail,com
@Arif, what materials did you study?
@bas4play and @Exam_NextWeek, how’s your exam goes?
anyone used spotoclub.com
peter,
I use a spoto dump
write to my emai asatau @ gmail.com for details (I inform you in advance that I will not send dump for free)
Anyone with 713q dumps willing to share at (please remove spaces) ccc1name @ gmail . com
stoch,
did you pass using the dump?
Hello, All
I pass with Chule’s dump. The Dump is quite valid around 65%
For the rest, I read official cert guide & looking for other comment in here.
www dropbox com/sh/6fu0xlyi5360s3p/AABSf3_CtJFF7eZb9yBTyvFIa?dl=0
Drag and drop
1. PVST,Rapid-PVST,MST
2. Access/Distribute/Core functionality
3. (What topic is) Network, Device Virtualization *NEW*
*NEW question* (Sorry that I can only type with brief detail here)
– What high availability can Nexus 9300 do?
– Recommended Multicast address for server
– Which activities are on ‘Plan’ phase?
– Redistribute OSPF in RIP configuration with metrics
– What are DMVPN function
– Question will give picture of Core-Distribute-Access-Host
& ask which layer2/3 zone should be located to make many VLAN go through (not remember)
– Method of redundancy traffic after failure of Virtual server (I answer OTV)
– Minimum devices for small & remote site 3 choices (AP, Catalyst Switch, Router)
Thank you & Good luck to you all!
@V thanks for your information.
Every one if remenber just 5 Qs will be great
Hi all,
I just passed the 200-310 exam with 900+ score. I used the OCG, some CVDs (brief review of the Data center CVD and enterprise architecture one) + the passleaders dumps ( which were 60-70% correct).
Lots of questions about Data center technologies, but if we exclude them, if you have passed CCNA RS and apply common sense you could answer most of the questions without problem.
However, if you guys wants to pass that exam before the changes, please study the OCG and review the Data center CVD (the rest of material is covered in the OCG). Passleaders dumps, yes, they’ve helped.
Also the questions from “V”:
Drag and drop
1. PVST,Rapid-PVST,MST
2. Access/Distribute/Core functionality
3. (What topic is) Network, Device Virtualization *NEW*
*NEW question* (Sorry that I can only type with brief detail here)
– What high availability can Nexus 9300 do?
– Recommended Multicast address for server
– Which activities are on ‘Plan’ phase?
– Redistribute OSPF in RIP configuration with metrics
– What are DMVPN function
– Question will give picture of Core-Distribute-Access-Host
& ask which layer2/3 zone should be located to make many VLAN go through (not remember)
– Method of redundancy traffic after failure of Virtual server (I answer OTV)
– Minimum devices for small & remote site 3 choices (AP, Catalyst Switch, Router)
were on the exam so review them as well.
Good luck guys!
Hi all,
I just passed the 200-310 exam with 900+ score.
What I can remember so far;
Drag and drops includes:
Map different type of STP technologies
1.
PVST —DC environments in which switching modes are mixture of IOS & NX-OS
MST —Hybrid environment with several vendors
Rapid-PVST —Environment based on IOS and no tuning to STP required
2.Access/Distribute/Core functionality
Access Layer
workgroup and user entry into the network
Distribution Layer
-Policy-based connectivity
-redistribute between routing domains
Core Layer
Fast transport between distribution switches in the network
3. Network Virtualization, Device Virtualization *NEW* –don’t need OTV but it is there
Network Virtualization
vPC
VSAN
VRF
VPN
Device Virtualization
ASA contexts
VSS
VDC
*NEW question* (Sorry that I can only type with brief detail here)
– What high availability can Nexus 9300 do?
Power Supply
Fan tray
– Recommended Multicast address for server
230.30.30.30
238.38.38.38
– Which activities are on ‘Plan’ phase?
– Redistribute OSPF in RIP configuration with metrics
– What are DMVPN function/characteristics:
..it creates & tears down spoke-to-spoke tunnels on demand
..it requires the use of NHRP
– Question will give picture of Core-Distribute-Access-Host
& ask which layer2/3 zone should be located to make many VLAN go through (not remember)
..Distribution layer
– Engineer design DR solution to avoid IP renumbering when bringing up virtual machines in alternate DC.which technology is used
..Overlay Transport Virtualization
– Minimum devices for LAN connectivity in a small office with mainly mobile users (AP, Catalyst Switch, Router,ASA-FW)
..I picked: ASA-FW & Catalyst Switch
were on the exam so review them as well.
Good luck guys!
Hi all
any body deal with this sites before ?? Can I trust them
http : // www . gooexam . com
http : // www . itexamlab . com
@milano
afew question out the dump back to @V comment
Bas4play @ can you please send me the dumps
arif,elyasee(a)gmail,com
May I know where i can get the CCDP ARCH 300-320 dumps?
@Bas4play – Thank you for sharing your experience with the exam and tools used. I’ve read the book and looked at some videos and I’m trying to piece everything together now. I’m taking my exam in a week and I’m hoping for the same results.
@JCN – I also attempting the exam next week, we can help each other out, if you don’t mind. i need all the help I can get .
Good luck
@CCNP – Sounds good. There is so much info to digest
Test is scheduled for next week. I’ll let you guys know how it goes.
@JCN – bet of luck with your test.
@Arif
I sent you 5 different dump files. I am not sure which one of them is valid. I would appreciate if you can let me know which one of them is valid.