Share your ARCH Experience

@anonymous I guess it’s stubby which correct

@CV

that was me…
so as per cisco.com:
Stub: No Type 5 AS-external LSA allowed
Totally Stub: No Type 3, 4 or 5 LSAs allowed except the default summary route
I am no OSPF expert, but I do not think we need LSA types 3 and 4 to just pass a default route, that’s why going 4 Totally Stubby

that said… if we want to pass the RIP on AREA 100 advertisement to AREA 1… then it’s NSSA “C”… coin toss here

Got it !makes sense

When you guys will sit for exam ? @ CV

After an acquisition, the new network is terminated into the router at Branch-1 .An engineer has been asked to propose a simplified OSPF routing design that limits routes advertised to the branches .Which type of OSPF area does the engineer implement for Branch-1 that meets this objective and allows for redistribution of the RIP domain? A. Normal area B. Not-so-stubby area. C. totally stubby area. D. stubby area

209 is NSSA for sure, the only OSPF stub that allows for redistribution… considering how they nicely ask in this case that we support redistribution; which they do not in 83… them 83 seems to be Tottally Stubby… which is the most restrictive that only allows for Default

Have you figure out any other comment or mistakes to sort it out?

221qs are otops questions. It is enough for 300-320 exam.
Good lucks everyone ;) I passed 90x
Thanks for sharing.

Can you share your exam questions copy and paste them from 221q?.

Have you used the same dump answer or edited ?

i’m ready fellas. I study all weekend and ready to pull trigger. doing exam on tuesday

Tuesday is to late

February 23, 2020
The 300-320 ARCH exam will be retired on February 23, 2020.

go you dumper you good thing

CISCO :)

so after CCDP expires ( 300-320) what’s next??

anyone kindly share dump for exam.

(300-420) Designing Cisco Enterprise Networks (ENSLD)

Core Issue
The router should be configured with minimum configuration for either the Protocol Independent Multicast (PIM) dense mode or the PIM sparse mode, to ensure that multicast traffic is switched through the router.

Resolution
Perform these configurations to enable multicast routing on a router:

Issue the ip multicast-routing command globally on the router.
Enable PIM sparse or dense mode, by issuing the ip pim sparse-dense-mode command on all the multicast interfaces.
In the case of sparse mode, a Rendezvous Point (RP) is to be configured. These are options to configure the RP in PIM sparse mode multicast networks:
Configure a static RP address by issuing the ip pim rp-address command. This method is not scalable, and is recommended only in very small, simple networks.
Auto-RP utilizes the sparse-dense mode, which allows a group to be treated in sparse mode if an RP is known. If an RP is not known, then the group defaults to dense mode. RP information is conveyed to the routers by the Auto-RP mechanism, which uses two well known groups: 224.0.1.39 and 224.0.1.40. The advantage of this is that any change to the RP designation needs to be configured only on the RP routers, and not on the leaf routers, as in the static configuration.

Passed today with 917 in South Africa.
The 221q dump had pretty much all the questions.

Good luck everyone!

221qs are otops questions. It is enough for 300-320 exam.
Good lucks everyone ;) I passed 90x
Thanks for sharing.

any guys got dump for ccdp exam
i want to read questions

hey guys
anyone provide workable dumping?

guys, come on over for dumps for new ccdp exam

any dumps?

ANY DUMP FOR CCDP OLD SKOOL?

hi captor
how r u
long time no dump scab

i passed 920.

Hi Guyes, where can I find the question for 300-320 ARCH exam? Could not find it anymore in dstut. Thanks!

The router should be configured with minimum configuration for either the Protocol Independent Multicast (PIM) dense mode or the PIM sparse mode, to ensure that multicast traffic is switched through the router.

Resolution
Perform these configurations to enable multicast routing on a router:

Issue the ip multicast-routing command globally on the router.
Enable PIM sparse or dense mode, by issuing the ip pim sparse-dense-mode command on all the multicast interfaces.
In the case of sparse mode, a Rendezvous Point (RP) is to be configured. These are options to configure the RP in PIM sparse mode multicast networks:
Configure a static RP address by issuing the ip pim rp-address command. This method is not scalable, and is recommended only in very small, simple networks.
Auto-RP utilizes the sparse-dense mode, which allows a group to be treated in sparse mode if an RP is known. If an RP is not known, then the group defaults to dense mode. RP information is conveyed to the routers by the Auto-RP mechanism, which uses two well known groups: 224.0.1.39 and 224.0.1.40. The advantage of this is that any change to the RP designation needs to be configured only on the RP routers, and not on the leaf routers, as in the static configuration.

I passed 2 days before with 96% There was few new questions

follow
????.??

NEW QUESTION 167
The Cisco Unified Wireless Product supports WMM. On which Wi-Fi Alliance interoperability standard is this based?

A. 802.11e
B. 802.11i
C. 802.1x
D. 802.11ah

Answer: A

NEW QUESTION 168
An engineer implements all remote sites using WLAN in FlexConnect with local authentication and the site experiences delays greater than 300 ms RTT. Which feature is disabled on the infrastructure?

A. AAA override
B. MFP
C. aWIPS
D. Local Auth

Answer: A

NEW QUESTION 169
Your network has these characteristics:
– CAC mode is set to load-based CAC
– The bandwidth usage is between 75 and 85 percent
– The reserved bandwidth for voice calls is exhausted
Which action occurs to TSPEC requests in this environment?

A. The normal TSPEC request is rejected and the expedited bandwidth request is admitted.
B. The normal TSPEC request is admitted and the expedited bandwidth request is rejected.
C. The normal TSPEC request is rejected and the expedited bandwidth request is rejected.
D. The normal TSPEC request is admitted and the expedited bandwidth request is admitted.

Answer: A

Hola! i got 97% all are dnd nd qs are same is in file

?????.??

NEW QUESTION 703
Which issue is a possible result of using the bottom-up approach to network design?

A. The designer is unable to draw on previous experience.
B. The network QoS policies might be configured improperly.
C. The resulting design might fail to meet the requirements of the organization.
D. The design process can be extremely time consuming.

Answer: C

NEW QUESTION 704
Which advantage to using route summarization is true?

A. enables efficient peering with other autonomous systems
B. provides an overview of all subnets used across the infrastructure
C. enabled recalculation of the routing table with any update for optimum convergence
D. reduces routing table size and improves convergence

Answer: D

NEW QUESTION 705
An application developer in your company requires a multicast host address for his application and asks for your recommendation. Which two multicast IPs do you recommend? (Choose two.)

A. 240.40.40.40
B. 223.23.23.23
C. 230.30.30.30
D. 211.11.11.11
E. 238.38.38.38

Answer: CE

Passed yesterday 96%

no lab, no new q
learn all questions in all sections

Thanks for this file follow the below link
????.??

@zeesh got 96%
Hello I passed the exam few hours ago all qs same as in dumps answer were accurate

Whtsap contact
chat.whatsapp.com/GsuEw33Wn0H7pc7GA1Xaf2

DumpsSure.com are valid.
Passed the exam with 920

hi where we can find dump for this course

Amazon-Dumps.com is providing valid dumps
passing secure is up-to 90%.

Passed the test freefilzze.no-izzp.fr depart (zzz) fr0m liink

i got 98% multiple-choice questions All MCQ questions from this files

All the best everyone

yesterday i passed my Exam thanks prep4cisCo for providing real and accurate dumps

Can any one advice and recommend who has tried the update dump from paSS4surehub DOT COM

True dumps are a lifesaver. Precise and effective. Passed with confidence!

saa-c03dumps.com

Passed the exam Thanks guys all qs are same only few new.,

Rplace NOT to Slashh
cutt.lyNOTRmGKVok

ARCH v2.1 642-874 Study Materials

i t e x a m s l a b

The study material was well-organized, making it easy to follow along and understand.

saa-c03dumps.com

Dumpsvibe.com is providing valid dumps